KPL- ReadMe File

Thruster Prop

a Krown Products Original

06/25/2008

Thank you for downloading this item.

This is a static (no morphs) object prop of a fetish device I saw at a "Lover's" store in Tacoma Washington. I took some measurements (you should have seen the looks I got) and reproduced it in Metasequia. No texture maps required, and yes, that was the real color.

Enjoy

Installation:

You can simply unpack the zipped file to your CONTENT folder.

- or -

1. Create a TEMP folder inside your CONTENT folder.
2. Unzip the contents in to the new TEMP folder.
3. Move the files from the TEMP folder and place them in the corresponding RUNTIME folders
4. Enjoy

File Structure:

...	content\
		ReadMe's\... This html document *
			KPL Originals\... Html related graphics *
		Runtime\
			Geometries\
				KPL Originals\... * Thruster-arm.obj Thruster-base.obj Thruster-shaft.obj
					KPL Originals\...
			Scenes\
				KPL Originals\...* Thruster.daz Thruster.daz.png

* Must be located in this folder.

Requirements:

Daz|Studio 1.0 or higher or Poser 4 or higher.
Tested with Daz|Studio Only.

Instructions:

This prop has three parts. The Base, Arm and Shaft and in that hierarchy order. Select the Base to move the prop around the scene.

Arm;
Use the Y Trans dial to raise or lower the arm and the Y Spin dial to rotate.

Shaft;
Use only the X Trans dial to move the Shaft in and out of the Arm.

For animations, the shaft speed can be controlled by using the movement range shown below per frame.

Speed:	Slow	Med.	Fast
Range:	4	6	10

Use one frame with 0 movement at the end of each stroke to keep the movement fluid, a delay if you will.

Usage:

The files enclosed in the zip file are free to use for all non-commercial/personal renders. Files may not be re-distributed without my express permission, and under no circumstances are any part or whole of these files to be used for a commercial 3D product. Please don't sell it or claim it as your own.

Please feel free to contact me with any comments, feedback or suggestions through Email or the online form at the website.

support@krown-products.net

Copyright:

Check out my website for other Daz/Poser stuff, more instructions and cool galleries.

www.krown-products.net/virtual/